Pinyin
| Chinese Language Romanization |
For Cantonese
|
Pinyin (拼音, pīnyīn) literally means "join together sounds" (a less literal translation being "phoneticize", "spell" or "transcription") in Chinese and usually refers to Hanyu pinyin (汉语拼音;, literal meaning: "Han language pinyin"), which is a system of romanization (phonetic notation and transliteration to roman script) for Mandarin used in the People's Republic of China. Pinyin was approved in 1958 and adopted in 1979 by its government. It superseded older transcriptions like the Wade-Giles system (1859; modified 1912) or Bopomofo. Similar systems have been designed for Chinese dialects and non-Han minority languages in the PRC. Cantonese also has a pinyin-type system called Penkyamp, whose name derives from the same word as pinyin, albeit articulated in the Cantonese dialect.
Since then, pinyin has been accepted by the Library of Congress, The American Library Association, and most international institutions as the transcription system for Mandarin. In 1979 the International Organization for Standardization (ISO) adopted pinyin as the standard romanization for Modern Chinese.
It is important to maintain the distinction that pinyin is a romanization and not an anglicization; that is, it is equally applicable for transliteration into any language that uses a roman alphabet. Indeed some of the transliterations in pinyin such as the "ang" ending, do not correspond to English pronunciations. Pinyin has also become a useful tool for entering Chinese language text into computers.
| Table of contents |
|
2 Orthographic features 3 Tones 4 Miscellanea 5 Pinyin in Taiwan 6 Controversy 7 External links 8 Fonts |
Pinyin uses the Roman alphabet, hence the pronunciation is relatively straightforward for Westerners. A pitfall for novices is, however, the unusual pronunciation of "x", "q" and (for English speakers) "c" and "z". The sounds represented by "x" and "q" in Western languages don't exist in Chinese, so the Pinyin system "recycles" them and assigns them other sounds: "x" represents a soft "sh" (like the "sh" in "sharp" but not as fully sounding), "q" represents a soft "ch" (again, like the "ch" in "chin" but not quite). The "c" is pronounced like "ts", "z" like "ds". Finally, "ü" stands for the same sound as in German and "u" is pronounced like "ü" if it follows "y", "x", "j" or "q". The combined initials, vowels, and finals represent the segmental phonemic portion of the language.
Initials:
In IPA:
Pronunciation
The primary purpose of pinyin in Chinese schools is to teach Mandarin pronunciation. Many in the West are under the mistaken belief that pinyin is used to help children associate characters with spoken words which they already know, but this is incorrect as many Chinese do not use Mandarin at home, and therefore do not know the Mandarin pronunciation of words until they learn them in elementary school through the use of pinyin.
| Bilabial | Labiodental | Alveolar | Retroflex | Alveolo-palatal | Velar | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Plosive | p | pʰ | t | tʰ | k | kʰ | |||||
| Nasal | m | n | |||||||||
| Fricative | f | s | ʂ | ʐ | ɕ | x | |||||
| Affricate | ts | tsʰ | tʂ | tʂʰ | tɕ | tɕʰ | |||||
| Lateral approximant | l | ||||||||||
| Approximant | w | j | ʁ | ||||||||
In Pinyin:
| Bilabial | Labiodental | Alveolar | Retroflex | Alveolo-palatal | Velar | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Plosive | b | p | d | t | g | k | |||||
| Nasal | m | n | |||||||||
| Fricative | f | s | sh | r | x | h | |||||
| Affricate | z | c | zh | ch | j | q | |||||
| Lateral approximant | l | ||||||||||
| Approximant | w | y | (') | ||||||||
Finals:
In IPA:
| z̩ | i | u | y |
| ɑ | iɑ | uɑ | |
| ɤ | uo | ||
| iɛ | yɛ | ||
| aɪ | uaɪ | ||
| eɪ | ueɪ | ||
| aʊ | iaʊ | ||
| ɤʊ | iɤʊ | ||
| an | iɛn | uan | yɛn |
| ən | in | uən | yn |
| ɑŋ | iɑŋ | uɑŋ | |
| ɤŋ | iɤŋ | ||
| ʊŋ | yʊŋ |
In Pinyin:
In combination with an initial:
| i | i | u | ü 1 |
| a | ia | ua | |
| e | o/uo 2 | ||
| ie | üe 1 | ||
| ai | uai | ||
| ei | ui | ||
| ao | iao | ||
| ou | iu | ||
| an | ian | uan | üan 1 |
| en | in | un | ün 1 |
| ang | iang | uang | |
| eng | ing | ||
| ong | iong |
In standalone form:
| yi | wu | yu | |
| a | ya | wa | |
| e | wo | ||
| ye | yue | ||
| ai | wai | ||
| ei | wei | ||
| ao | yao | ||
| ou | you | ||
| an | yan | wan | yuan |
| en | yin | wen | yun |
| ang | yang | wang | |
| eng | ying | (weng) | |
| yong |
1 "ü" becomes "u" after j q x.
2 "o" is used after b p m f, "uo" everywhere else.
3 /ər/ (而,二, etc.) is written as er. For other -r rhymes formed by the suffix -r, pinyin does not use special orthography; one simply appends -r to the rhyme that it is added to without regard for any sound changes that may take place along the way.
Rules given in terms of English pronunciation
All rules given here in terms of English pronunciation are approximate.
Orthographic features
Pinyin differs from other Romanizations in several aspects, such as:
), ĉ, ŝ . But the shorthands are rarely used due to difficulty to entering in computer.
Tones
The Pinyin system also incorporates suprasegmental phonemes to represent the four tones of Mandarin. Each tone is indicated by a diacritical mark above a non-medial vowel. In the following examples, the vowel used as an example is a.
- First tone is represented by a macron (ˉ) added to the pinyin vowel:
- ā
- Second tone is denoted by an acute accent (ˊ):
- á
- Third tone is symbolized by a caron (ˇ, also known as a reverse circumflex). Note, it is officially not breve (˘, lacking a downward angle), although this misuse is somewhat common on the Internet.
- ǎ
- Fourth tone is represented by a grave accent (ˋ):
- à
- Fifth tone is represented by a regular vowel without any accent mark:
- a
- a
The pinyin vowels are ordered as a, o, e, i, u, and ü. Generally, the tone mark is placed on the vowel that first appears in the order mentioned. Liú is a superficial exception whose true pronunciation is lióu. And since o precedes i, óu (contracted to ú) is marked.
These tone marks normally are only used in Mandarin textbooks or in foreign learning texts, but they are essential for correct pronunciation of Mandarin syllables.
A dieresis or an umlaut is occasionally used over the vowel u in conjunction with the tonal marks when placed after the initials l and n, which distinguishes between rounded-u and unrounded-u sounds. However, the umlaut-u is not used after the semiconsonant y and after the consonants j, q, and x. This practise is opposed to Wade-Giles, which always uses ü, and Tongyong Pinyin, which always uses yu.
Many fonts or inputs do not support diaeresis (umlaut) for ü, v is used instead by convention. Occasionally, uu (double u) or U (capital u) is used in its place.
See also:
Miscellanea
Pinyin in Taiwan
The Republic of China on Taiwan is in the process of adopting a modified version of pinyin (currently Tongyong Pinyin). For elementary education it has used zhuyin, and for romanization there is no standard system in general use on Taiwan despite many efforts to standardize on one system. In the late-1990s, the government of Taiwan formally decided to move from zhuyin to pinyin. This has triggered a very heated discussion of which pinyin system to use, hanyu pinyin of People's Republic of China or some other systems.
Much of the controversy centered on issues of national identity because of political interests. Proponents for adopting pinyin maintained that it is an international standard that is already used throughout the world. Proponents for adopting a new system maintain that Taiwan should have its own identity and culture apart from People's Republic of China.
A new system Tongyong Pinyin was created in Taiwan in 1998. Tongyong pinyin is mostly similar to Hanyu pinyin with a few changes for the letters of certain sounds.
On October 2002, the ROC government has adopted tongyong pinyin but through an administrative order which local governments can override. Localities with governments controlled by the Kuomintang, most notably Taipei City, have overridden the order and converted to hanyu pinyin (although with a slightly different capitialization convention than the Mainland). As a result, English signs have inconsistent romanization in Taiwan with most places using Tongyong Pinyin but some using Hanyu Pinyin. This has resulted in the odd situation in Taipei City in which inconsistent pinyin are shown in freeway directions, with freeway signs, which are under the control of the national government, using one pinyin, but surface street signs, which are under the control of the city government, using the other.
As of 2003, no form of pinyin is used in elementary education on Taiwan to teach pronunciation. Although the ROC government has stated the desire to use romanization rather than bopomofo in education, the lack of agreement on which form of pinyin to use and the huge logistical challenge of teacher training has stalled these efforts.
Controversy
Debate continues about the actual suitability of pinyin as a Chinese romanization method. This argument revolves around pinyin's unconventional use of Roman letters, of which the phonological values of some phonemes are quite different than that of most languages utilizing the Roman alphabet. Some sinologists praise this as pinyin's flexibility in that it allows the entire Roman alphabet to be adapted to the Chinese sound system (compared to Wade-Giles, which leaves out or underuses many letters); others, however, point out that pinyin letter values are hence so unconventional that they guarantee a very large number of mispronunciations in a non-Chinese reading the romanized text, again, in contrast with Wade-Giles. However, as not only the PRC but by now most institutions and publications have adopted it, the debate seems increasingly obsolete.
External links
Fonts
''Unicode has substantial pinyin handling. See Pinyin.info for details